Garmin GPSMAP 2006C User Manual

Page 60

Reference

Editing Routes



• Plan— The Route Review and Active Route pages also display trip-planning information for each leg or
the entire route. By entering your estimated speed, Fuel Flow, Departure Date, and Time, the unit
calculates your trip information and display it in the data ﬁeld on the far right of the Route Review and
Active Route pages. Available information includes ETA, Fuel (to point), Leg Distance, Leg Fuel, Leg Time,
Sunrise and Sunset (at point location), and Time To (point). Distance and Course between legs are
automatically displayed for all route points.

To use the Trip Planning feature:

1. To select the desired planning ﬁgure, highlight the desired route from the Route List and press

ENTER/MARK to display the Route Review page or you if you are already on an active route, press PAGE
or QUIT until the Active Route Page is displayed.

2. One of eight available data types appears to the far right of each route point along with the distance and

course. Use the LEFT/RIGHT keys on the ARROW KEYPAD to cycle through the data types.

3. To enter planning information, from the Route Review Page only, press the ‘Plan’

SOFT KEY. Enter the

ﬁgures for Speed, Fuel Flow, Departure Time, and Departure Date. Press

QUIT to return to the Route

Plan Page.

Fuel ﬂow rates on your unit are measured in “units per hour”. System setting changes
for units of measure (statute, nautical or metric) do not affect the fuel ﬂow measure. You
should enter fuel ﬂow rates based upon available information for your vehicle (operator’s
manual, performance speciﬁcations, etc.) and make note of the desired units of measure
(gallons, liters, etc.).

Press LEFT or RIGHT on the ARROW KEYPAD to change the
data types.