Garmin GPSMAP 2006C - Manual (Page 13)

4
Getting Started
Main Page Sequence
4
Getting Started
Main Page Sequence

First let’s take a look at the Main Display Pages as they come from the factory. There are five pages: the
Map Page, Sonar Page, Compass Page, Numbers Page, Highway Page and the Active Route Page. When the
unit is turned on the first Main Page displayed is the Map Page.
To scroll through the Main Display Pages:
1. Press the PAGE key. Each time the PAGE key is pressed the GPSMAP 2006/2010 will display the next Main
Page.
2. The QUIT key acts like the PAGE key in reverse. Each time the QUIT key is pressed, the next Main Page
will be displayed in a reverse sequence.
While learning the basic operation of the GPSMAP 2006/2010, let’s put the unit into its Simulator
Mode. The Simulator Mode is great for practicing with the unit. When the unit is in Simulator Mode,
it will not accept GPS input, but will simulate satellite navigation. When in the Simulator Mode, the
GPSMAP 2006/2010 CAN NOT be used for actual navigation.
NOTE: Do not try to navigate while using the Simulator Mode. When the GPSMAP
2006/2010 is using the built-in simulator, the unit is not accepting GPS input. The unit will,
however, simulate actual satellite navigation.
PAGE PAGE
QUIT QUIT
Map Page Compass Page Numbers Page Highway Page Active Route Page Sonar Page
(If equipped with
GSD 20)