Garmin GPSMAP 376C - Manual

GPSMAP ® 376C Quick Reference Guide
Finding Items
To find a waypoint or other item from your current location:
1. From any page, press FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item in the results list, and press ENTER.
Find Menu Navaid Search Results
To find an item from another location using the Find menu:
1. From any page, press FIND.
2. Press MENU. Highlight Near Other, and press ENTER.
3. Select a reference point on the map, and press ENTER. The list
shows items nearest to the new map location.
To find an item from another location on the Map Page:
1. From the Map Page, use the ROCKER to pan to the location you
want, and press FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item in the results list, and press ENTER.
Find From Map Pointer Search Results
Going to a Destination
To Go To a highlighted map item:
1. Use the ROCKER to highlight the item you want to navigate to on the
Map Page.
2. Press NAV/MOB, and then press ENTER.
3. Follow the magenta route created on the Map Page. You can also
use the Compass Page to help you navigate to the point.
Navigation shown on the
Map Page (Marine Mode)
Navigate Options with Map
Feature highlighted
To activate a Go To from the Find Menu:
1. Press the NAV/MOB key.
2. Use the ROCKER to highlight Go To Point, and press ENTER.
3. From the Find menu, highlight Waypoints, and press ENTER.
4. Select a waypoint from the list, and press ENTER to open the
Waypoint Review Page.
5. With the Go To button highlighted, press ENTER to begin navigation.
Using the Man OverBoard (MOB) Feature
Use the MOB function to simultaneously mark and set a course to a location
for quick response to emergency situations.
To start the MOB function:
1. Press and hold the NAV/MOB key, or press the NAV/MOB key twice.
2. Press ENTER to confirm and begin navigating to the MOB location.
MOB Confirmation Window
When a MOB is initiated, a MOB waypoint is created, and the unit begins to
navigate to that point. Use any of the navigation pages to guide you back to
the MOB point. The MOB waypoint is stored in the Waypoint list and can be
deleted like any other waypoint.
190-00508-01 Rev. B © Copyright 2006 Garmin Ltd. or its subsidiaries Printed in Taiwan
IN/OUT—press to zoom in or zoom out on the Map Page.
PAGE/MODE—press to cycle through the main pages in sequence
and return the display from a submenu page. Press and hold to switch
between Marine Mode and Automotive Mode.
QUIT—press to cycle through the main pages in reverse sequence,
revert to the previous value in a data entry field, or cancel a function.
ENTER/MARK—press to select a highlighted option, initiate entry,
and then confirm. Press and hold to mark a waypoint.
MENU/Wx—press to view Options Menu for the current page. Press
twice to open the Main Menu. Press and hold to turn the Map Page
weather off and on.
NAV/MOB—press to open the Navigation Menu window. In Marine
Mode, press and hold to activate the MOB function. In Automotive
Mode, press and hold to show the Next Turn Page and have the voice
prompt announce the next turn.
FIND—press to show the Find Menu.
POWER—press and hold to turn the unit on or off. Press and release
to adjust the backlighting and external speaker volume.
ROCKER—press up, down, left, or right to select menu options,
enter data, or move the pointer on the Map Page.
The GPS antenna
must be in the
upright position to
receive satellite
signals.