Garmin G1000 Quest Kodiak - Manual (Page 67)

190-00590-01 Rev. B Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 55
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
If the barometric altimeter settings differ between PFDs by more than 0.02 in Hg, the readouts turn yellow.
Once the settings are synchronized (BARO turned on), they remain synchronized until the setting is turned
off.
Synchronizing the altimeter barometric pressure settings:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight BARO in the Synchronization box.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
5) Press the FMS Knob to remove the cursor.
Figure 2-9 Baro Synchronization
(AUX - System Setup Page)
Barometric Settings not Synchronized