Using xm satellite weather products, Hazard avoidance – Garmin G1000 Quest Kodiak User Manual
Page 293
190-00590-01 Rev. B
Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
281
HAZARD AVOIDANCE
USING XM SATELLITE WEATHER PRODUCTS
The primary map for viewing XM Weather data is the Weather Data Link Page in the Map Page Group. This
is the only G1000 map display capable of showing information for all available XM weather products.
Viewing the Weather Data Link Page:
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Weather Data Link Page.
Figure 6-2 Weather Data Link Page
NEXRAD Weather
Product Selected
for Display
NEXRAD Weather
Product Display
Enabled
NEXRAD Weather
Product Age
When a weather product is active on the Weather Data Link Page or the Navigation Map Page, the age of the
data is displayed on the screen (Figure 6-2). The age of the product is based on the time difference between
when the data was assembled on the ground and the current GPS time. Weather products are refreshed at
specific intervals (defined in the Refresh Rate column in Table 6-1).
If for any reason, a weather product is not refreshed within the 30-, 60-, or 90-minute Expiration Time
intervals (see Table 6-1), the data is considered expired and is removed from the display. This ensures that the
displayed data is consistent with what is currently being broadcast by XM Satellite Radio services. If more than
half of the expiration time has elapsed, the color of the product age displayed changes to yellow.