Adding a dsc contact, Viewing the dsc list, Receiving distress calls – Garmin GPSMAP 545s User Manual
Page 62
56
GPSMAP 400/500 Series Owner’s Manual
Using Digital Selective Calling
To turn DSC on or off:
1. Select
Configure
>
Other Vessels
.
2. Select
DSC
to toggle it on or off.
Adding a DSC Contact
You can make calls to a DSC contact from the chartplotter. See
for information on making an individual routine call.
1. While viewing a chart, press
MENU
>
Other Vessels
>
DSC
>
DSC List
>
Add Contact
.
2. Use the
Rocker
to enter the Maritime Mobile Service Identity
(MMSI) number of the vessel, and press
SELECT
.
3. Use the on-screen keyboard to enter the name of the vessel, and
select
Done
.
Viewing the DSC List
The DSC list is a log of the most-recent DSC calls and other DSC
contacts you have entered. The DSC list can contain up to 100
entries. The DSC list shows the most-recent call from a boat. If a
second call is received from the same boat, it replaces the first call in
the call list.
From a chart screen, press
MENU
>
Other Vessels
>
dSC
>
dSC
List
.
Receiving Distress Calls
If your Garmin chartplotter and VHF radio are connected via NMEA
0183 or NMEA 2000, your chartplotter alerts you when your VHF
radio receives a DSC distress call. If position information was sent
with the distress call, that information is also available and recorded
with the call.
The symbol designates a distress call in the DSC List and marks
the position of a vessel on the Navigation chart at the time the DSC
distress call was sent.
When you receive a DSC distress call:
1. Select
Review
to view details about the call.
2. Complete one of the following:
• Select
Call with Radio
to set up an individual routine call
with the radio to call the vessel in distress (
). This
option is only available if you are using a Garmin NMEA
2000-compatible VHF radio.
• Select
Edit
to edit the vessel name and add a comment. If
your radio is tracking the position of the vessel, select
Trail
to
show or hide the trail line for the vessel, and select
Trail Line
to change the line color. Select
Clear Report
to delete the
call report. Select
Create Waypoint
to set a waypoint at the
position sent with the distress call.