Using fishing charts, Enabling high resolution satellite imagery, Be displayed on the fishing chart – Garmin GPSMAP 545s User Manual
Page 25
GPSMAP 400/500 Series Owner’s Manual
19
Using Charts
Using Fishing Charts
Use the Fishing chart for a detailed, unobstructed view of the bottom
contours on the chart.
The Fishing chart uses detailed bathymetric data on a
preprogrammed BlueChart g2 Vision SD card, and is best for
offshore deep-sea fishing.
From the Home screen, select
Charts
>
fishing Chart
.
To access additional settings from the Fishing chart, press
MENU
.
Navaids—displays navigational aids, such as beacons, lights, and
obstructions.
For settings and options related to Full Screen Map, Waypoints &
Tracks, Other Vessels, and Data Bars, see “Navigation Chart Menu”
.
To customize the appearance of the Fishing Chart screen, select
MENU
>
Chart Setup
(
Enabling High Resolution Satellite Imagery
You can overlay high-resolution satellite images on the land, sea, or
both portions of the Navigation chart when using a preprogrammed
BlueChart g2 Vision SD card.
To enable satellite imagery:
1. While viewing the Navigation chart, press
MENU
.
2. Select
Chart Setup
>
Photos
.
3. Select one of the following:
•
Off—standard chart information is shown on the map.
•
Land Only—standard chart information is shown on water
with photos overlaying the land.
•
On—photos overlay both the water and the land at a specified
opacity. The higher you set the percentage, the more the
satellite photos will cover both land and water.