Garmin GPSMAP 545s - Manual (Page 35)

GPSMAP 400/500 Series Owner’s Manual 29
Where To?
Creating and Using Waypoints
You can store up to 1,500 waypoints (3,000 waypoints for models
GPSMAP 431/441/531/541/536/546, including “s” models) with a
user-defined name, symbol, depth, water temperature, and comment
for each waypoint.
To create a new waypoint:
1. From the Home screen, select Charts > Navigation Chart .
2. Use the map pointer ( ) to select the location you want to
designate as a waypoint.
3. Press SELECT .
4. Select Create Waypoint .
To mark your current location as a waypoint:
From any screen, press the MARK key.
• Edit Waypoint—designate a specific name, symbol, water
depth, or water temperature.
• Delete—deletes the waypoint.
• Man Overboard—designates the current location as a Man
Overboard location.
• Right or Left Arrow—switches between waypoint information
and the Navigation chart.
NOTE: Selecting MaRK creates a waypoint only at your present
location.
To edit an existing waypoint:
1. From the Navigation chart, use the map pointer ( ) to highlight
the waypoint on the Navigation chart.
OR
From the Home screen, select Information > User Data >
Waypoints .
2. Select the waypoint you want to edit.
3. Select
Edit Waypoint .
4. Select the waypoint attribute you want to change ( Name ,
Symbol , Depth , Water Temp , Comment , or Position ).
To move the waypoint on the Navigation chart:
1. Select the waypoint on the Navigation chart.
2. Select
Review . (The Review button is only shown when more
than one waypoint is in the vicinity.)
3. Select the button for the waypoint you want to edit.
4. Select
Move .
5. Press SELECT to save the new location, or press MENU to
cancel the move.
To view a list of all waypoints:
From the Home screen, select Information > User Data >
Waypoints .