Garmin GPSMAP 545s - Manual (Page 31)

GPSMAP 400/500 Series Owner’s Manual 25
Using Charts
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .
3. Select MENU > Other Vessels > Display Setup .
• Display Range—allows you to select the distance from your
location in which AIS vessels appear.
• Details—hides or shows details about AIS-activated vessels.
• Proj. Heading—allows you to set the projected heading time
for AIS-activated vessels.
• Trails—allows you to select the length of the track that
appears using a trail, or turn the trail off.
Activating a Target for an AIS Vessel
NOTE: The Fishing chart and Mariner’s Eye 3D are available with a
preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select Charts .
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .
3. Use the Rocker and SELECT button to select an AIS vessel.
4. Select AIS Vessel > Activate Target .
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS
heading, and other information that is reported about a targeted AIS
vessel.
1. From the Home screen, select Charts .
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .
3. Use the Rocker and SELECT button to select an AIS vessel.
4. Select AIS Vessel .
Deactivating a Target for an AIS Vessel
NOTE: The Fishing chart and Mariner’s Eye 3D are available with a
preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select Charts .
2. Select Navigation Chart , Fishing Chart , Perspective 3D , or
Mariner’s Eye 3D .
3. Use the Rocker to select the AIS vessel.
4. Select AIS Vessel > Deactivate .