Using mariner’s eye 3d – Garmin GPSMAP 545s User Manual
Page 22
16
GPSMAP 400/500 Series Owner’s Manual
Using Charts
• Tracks—turn tracks on or off (
• waypoints—view, sort, or filter existing waypoints, or create
new ones.
• New waypoint—edit, delete, or create a new waypoint.
• active Tracks—manage tracks (
).
• Saved Tracks—view a list of tracks that have been saved.
Other Vessels—view information about other vessels. To view
information about other vessels, your unit must be connected to an
external AIS (Automatic Identification System) or DSC (Digital
Selective Calling) device.
weather Radar—turn the display of NEXRAD weather on or
off. (The weather feature is only available if the chartplotter is
connected to a weather module and you have an XM subscription.)
for additional information.
data bars (
page 9
)—show or hide cruising, navigation, fishing,
fuel, sailing numbers, or compass tape.
Chart appearance—customize the Perspective 3D chart.
• Range Rings—toggles the range rings on or off to provide
distance measurement.
• Lane width—adjusts the width of the course line drawn when
navigating. This setting also affects routes (Route To), but does
not affect automatic guidance (guide To).
Using Mariner’s Eye 3D
A BlueChart g2 Vision SD card offers Mariner’s Eye 3D, which
provides a detailed three-dimensional view from above and behind
the boat (according to your course), and provides a visual navigation
aid. This view is helpful when navigating tricky shoals, reefs,
bridges, or channels, and is beneficial when trying to identify entry
and exit routes in unfamiliar harbors or anchorages.
Mariner's Eye 3D
Navigation Chart