Garmin GPSMAP 545s - Manual (Page 42)

36 GPSMAP 400/500 Series Owner’s Manual
Viewing Information
To view fuel information, your unit must be connected to an external
fuel sensor, such as the Garmin GFS ™ 10.
To synchronize your fuel gauges with your fuel:
From the Home screen, select Information > Dashboard > Fuel
> MENU .
• Fill Up All Tanks—select when your tank is full. An estimate
of the total fuel is shown. Adjust if necessary.
• Add Fuel To Boat—select when you have added less than
a full tank. An estimate of the fuel added is shown. Adjust if
necessary.
• Set Total Fuel Onboard—select to specify the total fuel in
your tanks.
• Fuel Economy—select either GPS Speed or Water Speed
(using data from a speed wheel) for the fuel economy
calculation.
Viewing Tide-station Information
NOTE: You must use a BlueChart g2 Vision card to view Tide-
station information.
1. Select Information > Tides & Currents > Tides .
2. Select a tide station. Tide-station information is shown.
Select Change Date > Manual to view tide information for a
different date.
Select Show Report to view the Tide Prediction Report for the
selected station.
Viewing Current Information
Use the Current Prediction screen to view information for currents.
NOTE: You must use a BlueChart g2 Vision card to view Tide-
station information.