Garmin G1000 Mooney M20TN - Manual (Page 88)

190-00647-01 Rev. B Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 77
ENGINE INDICATION SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
3.4 EIS DISPLAY IN REVERSIONARY MODE
NOTE: Refer to the Aircraft Flight Manual (AFM) for limitations.
In reversionary display mode, the remaining display is re-configured to present PFD symbology together with
the EIS Display (refer to the System Overview for information about display Reversionary Mode).
When the G1000 displays enter reversionary mode, the EIS is separated into three displays: Engine (identical to
the normal EIS Display on the MFD), Lean, and System. For a description of the EIS Strip, refer to Section 3.1.
The Lean Display presents temperature information and assistance for engine leaning. The System Display shows
various system parameters and fuel calculations.
NOTE: If any parameters are exceeded while displaying the Lean or System pages, the system automatically
switches back to the EIS Engine Strip.
Figure 3-12 Reversionary Mode (M20R)
EIS Display