Fuel calculations, Engine indication system – Garmin G1000 Mooney M20TN User Manual
Page 86
![background image](/manuals/250503/86/background.png)
190-00647-01 Rev. B
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
75
ENGINE INDICATION SYSTEM
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
FUEL CALCULATIONS
NOTE:
Fuel calculations do not use the aircraft fuel quantity indicators and are calculated from the last time
the fuel was reset.
Endurance (ENDURANCE), and range (in nautical miles, RANGE NM) are calculated based on the displayed
fuel remaining (GAL REM) and the fuel flow totalizer. The calculated range is based upon groundspeed and
fuel remaining. See the Flight Management Section for information regarding the map feature related to the EIS
Fuel Calculations.
Adjusting the fuel totalizer quantity:
On the Engine Page, use the DEC FUEL and INC FUEL softkeys to obtain the desired fuel remaining (GAL REM).
Resetting the fuel totalizer:
On the Engine Page, press the RST FUEL Softkey; this resets displayed fuel remaining (GAL REM) to maximum
fuel capacity for aircraft.
Calculated
Range
Calculated
Endurance
Fuel
Remaining
Figure 3-10 Fuel Calculations Group