Garmin G1000 Mooney M20TN - Manual (Page 460)

190-00647-01 Rev. B Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
449
APPENDIX A
GMU 44 MESSAGE ADVISORIES
Message Comments
HDG FAULT – AHRS1 magnetometer
fault has occurred. A fault has occurred in the #1 GMU 44. Heading is flagged as invalid. The AHRS uses
GPS for backup mode operation. The G1000 system should be serviced.
MANIFEST – GMU1 software
mismatch, communication halted.
The GMU 44 has incorrect software installed. The G1000 system should be serviced.
GDL 69A MESSAGE ADVISORIES
Message Comments
GDL69 CONFIG – GDL 69 config
error. Config service req’d. GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL – GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
MANIFEST – GDL software mismatch,
communication halted. The GDL 69 has incorrect software installed. The G1000 system should be serviced.
GDC 74A MESSAGE ADVISORIES
Message Comments
ADC1 ALT EC – ADC1 altitude error
correction is unavailable.
GDC1 is reporting that the altitude error correction is unavailable.
ADC1 AS EC – ADC1 airspeed error
correction is unavailable.
GDC1 is reporting that the airspeed error correction is unavailable.
MANIFEST – GDC1 software
mismatch, communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be serviced.