6 l-3 skywatch traffic advisory system (tas), Tas symbology, 6 l-3 skywatch traffic advisory system (tas) – Garmin G1000 Mooney M20TN User Manual
Page 335: Hazard avoidance

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
190-00647-01 Rev. B
324
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
6.6 L-3 SKYWATCH TRAFFIC ADVISORY SYSTEM (TAS)
NOTE:
TIS is disabled when Traffic Advisory System (TAS) is installed.
Refer to the SKYWATCH®HP (SKY497) Pilot’s Guide for a detailed discussion of the SKY497 TAS System.
The type of traffic system installed is determined by the Traffic Page softkeys.
TAS SYMBOLOGY
Traffic Advisory System (TAS) is designed to help in detection and avoidance of other aircraft. TAS uses an on-
board interrogator-processor and the Mode S transponder for the air-to-air traffic data link. Traffic is displayed
according to TCAS symbology using four different symbols.
TAS Symbol
Description
Non-Threat Traffic
Proximity Advisory (PA)
Traffic Advisory (TA)
Traffic Advisory Off Scale
Table 6-14 TAS Symbol Description
A Non-threat Advisory, shown as an open white diamond, indicates that an intruding aircraft is at greater than
±1200 feet relative altitude or the distance is beyond 5 nm.
A Proximity Advisory indicates that the intruding aircraft is within ±1200 feet and is within 5 nm range, but
is still not considered a threat.
A Traffic Advisory (TA) alerts the crew to a potentially hazardous intruding aircraft. Closing rate, distance,
and vertical separation meet TA criteria. A Traffic Advisory that is beyond the selected display range is indicated
by a half TA symbol at the edge of the screen at the relative bearing of the intruder.