Hazard avoidance, Displaying traffic data – Garmin G1000 Mooney M20TN User Manual
Page 337
![background image](/manuals/250503/337/background.png)
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
190-00647-01 Rev. B
326
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Figure 6-71 Traffic Map Page
Operating
Mode
Altitude
Mode
Traffic Advisory,
Aircraft is
400’ Below,
Climbing
Off Scale
Traffic
“Non-Bearing”
Traffic (Bearing
Undetermined),
Distance 8.0 nm,
1100’ Above,
Descending
Proximity
Traffic, 1000’
Above,
Descending
Traffic Display
Range
The Traffic Map Page shows surrounding TAS traffic data in relation to the aircraft’s current position and
altitude, without basemap clutter. Aircraft orientation is always heading up unless there is no valid heading.
Map range is adjustable with the RANGE Knob from 2 to 24 nm, as indicated by the map range rings.
The traffic mode and altitude display mode are annunciated in the upper left corner.
DISPLAYING TRAFFIC DATA
Traffic information can be displayed on the following maps when the SKY497 unit is operating:
• PFD Inset Map
• Navigation Map Page
• Traffic Map Page
• Trip Planning Page
• Nearest Pages
• Active Flight Plan Page
Displaying traffic information (maps other than the Traffic Map Page):
1)
Press the MAP Softkey (for the PFD Inset Map, press the INSET Softkey).
2)
Press the TRAFFIC Softkey. Traffic is now displayed on the map.
When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate TAS is
enabled for display.