4 secure digital (sd) cards, System overview – Garmin G1000 Quest Kodiak User Manual
Page 23
![background image](/manuals/250394/23/background.png)
190-00590-03 Rev. A
Garmin G1000 Pilot’s Guide for the Quest KODIAK 100
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
11
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& cNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
1.4 SECURE DIGITAL (SD) CARDS
NOTE:
Ensure the G1000 System is powered off before inserting an SD card.
NOTE:
Refer to Appendix B for instructions on updating the aviation databases.
The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the upper right side of the
display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for aviation database
and system software updates as well as terrain database storage. Also, flight plans may be imported or exported
from an SD card in the MFD.
Not all SD cards are compatible with the G1000. Use only SD cards supplied by Garmin or the aircraft
manufacturer.
Ins
talling an SD card:
1)
Insert the SD card in the SD card slot (the front of the card should be flush with the face of the display bezel).
2)
To eject the card, gently press on the SD card to release the spring latch.
Figure 1-5 Display Bezel SD Card Slots
SD Card Slots