Panasonic SDR-S10 - Manual (Page 94)

94
VQT1E14
Others
∫ [DISPLAY]
The screen indications are selected as
shown in the illustration below.
∫ [POWER SAVE]
[OFF]:
The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes have passed
without any operation, this unit
automatically turns off to prevent the
battery from running down. When you
use this unit, turn it on again.
≥ In the following cases, the unit may not
turn off even when you set this to
[5 MINUTES].
jWhen using the AC adaptor
jWhen connecting the unit to a
computer or printer via the USB
cable
∫ [BEEP SOUND]
This allows operations such as starting
and ending recording to be signaled by a
beep.
When [OFF] is set, no beep is heard
when an operation such as recording is
started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the
computer or the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not
starting. Check the sentence displayed
on the screen. (l 98)
∫ [INITIAL SET]
When there is a menu that cannot be
selected due another function or mode
being activated, set to [YES] for
changing the menu settings back to the
initial shipping condition.
(The language setting cannot be
changed back to the initial shipping
condition.)
Menus related to
[SETUP]
≥ [OFF] ≥ [ON]
[OFF]
[ON]
≥ [OFF] ≥ [5 MINUTES]
;
;
0h00m00s
R 1h30m
SP
≥ [OFF] ≥ [ON]
≥ [YES] ≥ [NO]
VQT1E14(EB_GC_ENG).book 94 ページ ２００７年２月２８日 水曜日 午後２時２３分