Panasonic SDR-S10 - Manual (Page 85)

85
VQT1E14
With a computer
For details on how to use MotionSD
STUDIO, read the PDF instructions.
Select [start] >
[All Programs (Programs)] >
[Panasonic] >
[MotionSD STUDIO 1.2E] >
[Manual].
≥ After starting the software, on the
menu select [Help] >[Manual] to
display the help files.
≥ You will need Adobe Acrobat Reader
5.0 or later to read the PDF operating
instructions. (l 78)
After the software is installed, the unit
must be connected to the computer and
be correctly recognised by the computer.
≥ Connect after installing the software.
≥ If the supplied CD-ROM is inserted in
the computer, remove it. (If the installer
setup is running, wait until it finishes,
then remove the CD-ROM.)
≥ If the recognition procedure is not
accomplished properly, operation will
not be possible after connecting the
unit to the computer.
≥ If the unit fails to operate normally, it
may mean that you have not
conducted the installation or
recognition procedure properly.
1
Slide the terminal cover lock
to OPEN and then open the
terminal cover.
2
Connect this unit to the AC
adaptor and turn on the unit.
≥ Be sure to set the mode dial to
OFF when connecting the AC
adaptor to this unit.
Reading the MotionSD
STUDIO operating
instructions Connection and
recognition procedures
VQT1E14(EB_GC_ENG).book 85 ページ ２００７年２月２８日 水曜日 午後２時２３分