Panasonic SDR-S10 - Manual (Page 76)

76
VQT1E14
With other products
2
Connect this unit to a printer.
A USB cable (supplied)
≥ Insert the plugs as far as they will
go.
≥ Do not use any other USB
connection cables except the
supplied one. (Operation is not
guaranteed with any other USB
cables.)
3
Press the cursor button up or
down to select [PictBridge],
then press the cursor button
in the centre.
≥ The [ ] indication
appears on this unit’s screen.
4
Select a file to be printed, then
press the cursor button in the
centre.
The number of pictures set is
displayed.
5
Press the cursor button up or
down to select the desired
number of prints, then press
the cursor button in the
centre.
≥ You can set up to 9 prints.
≥ To cancel the setting, set the
number of prints to [0].
≥ Up to 8 files displayed on a page
can be set in succession by
repeating steps 4 and 5.
6
Press the MENU button to
display the PictBridge menus.
7
Select the date print setting on
[DATE PRINT].
≥ If the printer is not capable of date
printing, this setting is unavailable.
A
VQT1E14(EB_GC_ENG).book 76 ページ ２００７年２月２８日 水曜日 午後２時２３分