Panasonic SDR-S10 - Manual (Page 57)

57
VQT1E14
Recording
1
Select [ ] and then fill the
screen with a white subject.
2
Press the cursor button up to
select [
].
When the [ ] display changes from
flashing to on, setting is complete.
≥ When the [
] display continues
flashing, the white balance cannot be
set because the place is dark etc. In
this case, use the automatic white
balance.
∫ About the white balance
sensor A
The white balance sensor detects the
type of light source during recording.
Do not cover the white balance sensor
during recording or it may not function
properly.
≥ When the [ ] display flashes, the
manual white balance previously
adjusted is stored.
Whenever recording conditions
change, re-set the white balance for
correct adjustment.
≥ When setting both the white balance
and the iris/gain, set the white balance
first.
To set the white balance
manually
MNL
BACK BACK BACK BACK
MNL
BACK BACK BACK
A
VQT1E14(EB_GC_ENG).book 57 ページ ２００７年２月２８日 水曜日 午後２時２３分