RIDGID micro CA-300 - Manual (Page 9)

micro CA-300 Inspection Camera
7
Tool Assembly
WARNING
To reduce the risk of serious injury during
use, follow these procedures for proper as‑
sembly.
Changing/Installing Batteries
The micro CA‑300 is supplied without the
battery installed. If the battery indicator dis‑
plays , the battery needs to be recharged.
Re move the battery prior to long term stor‑
age to avoid battery leakage.
1. Squeeze the battery clips (See Figure 5)
and pull to remove battery compart‑
ment cover. If needed, slide battery out.
Figure 5 - Battery Compartment Cover
Factory Reset – Restore factory
defaults.
Language – Choose between,
English, French, Spanish, German,
Dutch, Italian, etc.
Save – Indicates image or video
has been saved to memory.
Speaker – Keep the speaker on or
off during video playback.
Trash – Delete confirmation icon.
TV – Chose between NTSC and PAL
to enable TV out video format.
LED Brightness – Press right & left
arrows to change the LED bright‑
ness.
Zoom – Press up & down arrows to
change the zoom from 1.0x to 3.5x
• Reorient or relocate the receiving antenna.
• Increase the separation between the quip‑
ment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
Electromagnetic
Compatibility (EMC)
The term electromagnetic compatibility is
taken to mean the capability of the prod‑
uct to function smoothly in an environment
where electromagnetic radiation and elec‑
trostatic discharges are present and without
causing electromagnet interference to other
equipment.
NOTICE The RIDGID micro CA‑300 Inspect‑
ion Camera conforms to all applicable EMC
standards. However, the possibility of it caus‑
ing interference in other devices cannot be
precluded.
Icons
Battery Life Indicator – Fully
charged battery.
Battery Life Indicator – Less than
25% of battery charge remains.
SD™ Card – Indicates an SD card
has been inserted into the device.
Still Camera – Indicates device is
operating in still camera mode.
Video Camera – Indicates device is
operating in video camera mode.
Playback Mode – Pressing select
on this icon allows you to view and
delete previously saved images and
video.
Menu – Push select on this icon to
be taken to the menu screen.
Select – Pressing select from the
live screen will take you to the
primary settings screen.
Automatic Power Off – Device will
automatically shut down after 5, 15
or 60 minutes of inactivity.
About – Displays software version.
Time and Date – Enter this screen
to set time and date.