RIDGID micro CA-300 - Manual (Page 15)

micro CA-300 Inspection Camera
13
Figure 18 - Settings Screen
Playback Mode
1. Press the Menu button
, use the
down arrow to select Playback mode
icon and use the Select button to
enter play‑back mode. Select either Im‑
age or Video to playback the desired file.
The playback mode is the interface into
saved files. It will default to the last file
recorded.
2. While reviewing the image the user will
be able to cycle through all saved im‑
ages, delete an image and display file
informa tion.
3. While reviewing a video, a user will be
able to navigate through videos, pause,
seek forward, restart, add bookmark and
delete.
Deleting Files
Press menu button
while in play‑
back mode to delete the image or video.
The delete confirmation dialog allows
the user to delete unwanted files. The ac‑
tive icon is outlined in red. Navigation is
done with the arrow buttons .
Time Stamp
Enable or Disable the display of the Date and
Time.
Image Quality
Select the desired image quality. The higher
the image quality, the more space that will
be used for each file. The approximate re‑
maining number of images that can be saved
will be shown.
Video Quality
Select the desired image quality. The higher
the video quality the more space that will be
used for each file. The approximate remaining
time that can be recorded will be shown.
Language
Select the “Language” icon in the menu and
press Select. Select different languages with
up/down arrow buttons , then press Se‑
lect to save the language setting.
Date/Time
Select Set Date or Set Time to set the current
date or time. Select Format Date or Time to
change how the date/time is displayed.
TV‑Out
Select the “NTSC” or “PAL” to enable the TV‑
Out for the video format required. Select OFF
to Disable the TV‑Out.
Storage
Select the storage icon in the menu and
press select to format the SD™ memory card.
This feature is normally only needed if there
is an issue with the SD™ card.
Speaker
Select the speaker icon in the menu and
press select . Select ON or OFF with up/
down button to keep the speaker ON or
OFF during video playback.
Auto Power Off
Select the auto‑power off icon and press
select . Select disable to turn OFF the
auto ma tic shut down function. Select the 5
Minutes, 15 Minutes or 60 Minutes to turn
OFF the tool upon 5/15/60 minutes of non‑
operation. Automatic shut down setting will
not be activated when recording or playing
video.
Factory Reset
Select the reset icon and press select .
Confirm the reset function by selecting Yes
and press Select again. This will reset
the tool to the factory set up.
About
Select the about function to display the firm‑
ware revision of the micro CA‑300 as well as
the software copyright information.
Transferring Images to a
Computer
Connect the micro CA‑300 to a computer us‑
ing the USB cable. The USB connected screen
is displayed on the micro CA‑300 screen and
the camera is accessible as a standard USB
storage device.