Edimax Technology EK-16RC - Manual (Page 24)

24
Note: You can also change leading hot key via hot key by using < CTRL > →
< CTRL > → < New Hotkey > → < Enter > outside the OSD mode.
Please refer section 6.2 Leading Hot Key Select.
7.3.6. Sound
¾ ON: Buzzer sound enabled.
¾ OFF: Buzzer sound disabled.
Note: You can also enable/disable buzzer sound via hot key by using
→ → → outside the
OSD mode. Please refer section 6.5 Buzzer sound Disable / Enable.
7.3.7. Language
English (En) / Deutsch (De) / Francais (Fr), 3 languages are available.
7.4. Auto-Scan in OSD:
7.4.1. Start to auto-scan in OSD
Press in OSD main menu. The auto-scan banner will be shown to
indicate the scanning channel.
─┬── ┬ ──┬──────
│ │ └─ Channel Name
│ └────────── Channel Number
└─────────────── Indicate now is Scan Mode
Figure 22: Auto-Scan Banner
Note: You can also start auto-scan function via hot key by using
→ → → outside the
OSD mode. Please refer section 6.6.1 Start Auto-Scan Function.
7.4.2. Stop auto-scan
Press any key on keyboard to STOP the auto-scan function. The
auto-scan banner will disappear when the scan stops.