Edimax Technology EK-16RC - Manual (Page 16)

16
automatically shift to left or right one channel (channel decrease / increase
to next) when < ALT > channel shift function is enabled.
¾ Enable/Disable channel shift function
→ → < ALT > →
¾ Switch to left one channel
→ < Left ALT >
¾ Switch to right one channel
→ < Right ALT >
6.4. Channel Select - Cascade Chain Layer
You can select the active channel directly under cascade chain connection.
The following hot key sequence is used for quick channel selection.
Press twice, , the cascade channel number (1, 2, 3……16),
and Press .
¾ Channel select to first layer
< Scroll Lock > → < Scroll Lock > → → < CH-L1 > → < Enter >
¾ Channel select to second layer
< Scroll Lock > → < Scroll Lock > → → < CH- L1 >
→ → < CH-L2 > → < Enter >
¾ Channel select to third layer
< Scroll Lock > → < Scroll Lock > → →
→ → < CH-L2 >
→ → < CH-L3 > → < Enter >
Note: With cascading 3 layers, you can select last layer directly;
Example: press twice, then D2D5D7, and :
D2 : layer 1 channel 2 links to
D5 : layer 2 channel 5 links to
D7 : layer 3 channel 7 selected
Note: You can also select active channel of cascade chain in OSD menu.
Move the indicator bar to the chanel to switch by using ,