Edimax Technology EK-16RC - Manual (Page 17)

17
or , and then press to switch to the
target port. Please refer section 7.2.2 Channel select to cascade port.
6.5. Buzzer sound Disable / Enable
Press twice, then and . The buzzer sound will be
disabled / enabled alternately. The buzzer sound default setting is ON.
→ → →
Note: You can also enable/disable buzzer sound by pressing in OSD
main menu. Please refer section 7.3.6 Setup in OSD - Sound.
.
Figure 13: Buzzer setup hot key
6.6. Auto-Scan Function
When you enable Auto-Scan function by pressing twice, then
and . The KVM Switch will shift through all the ports and display
them on the monitor.
The mouse and keyboard will be disabled under this mode. This is necessary to
prevent errors such as erratic movement and wrong characters to display when
using the mouse or keyboard in accident.
6.6.1. Start auto-scan function
→ → → . The auto-scan
banner will be shown to indicate the scanning channel.