Edimax Technology EK-16RC - Manual (Page 15)

15
Figure 12: Specific channel selection hot key
→ → <1> → or
→ → <2> → or
…
…
→ → <16> →
Note: You can also select computers in OSD menu. Move the indicator bar
to the chanel to switch by using , or
Down>, then press to select the connected computer.
Please refer section 7.2 Channel Selection in OSD.
6.3.2. Arrow Key Channel Shift Function
Press twice, and press or
key to shift left/right one channel.
¾ Switch to left one channel
→ →
¾ Switch to right one channel
→ →
6.3.3. Channel Shift Function
1. Start Channel shift Function
< ALT > channel shift function default was off. You can press Hot-Key
twice, and then press to turn on or turn off
this function alternately.
2. Shift the channel by key
Press left < ALT > or right < ALT > key twice, the PC channel will