Edimax Technology EK-16RC - Manual (Page 11)

11
E. Next, plug in power adapter for each level Slave KVM Switch and connect
Slave KVM switch to computers .
F. The power on sequence should be:
1. Master KVM Switch
2. Second level Slave KVM Switch (connecting to Master KVM Switch) if
any.
3. Third level Slave KVM Switch (connecting to second level Slave KVM
Switch) if any.
4. All computers connecting to Master/Slave KVM Switch.
G. After all KVM Switches are powerd by power adaptor, trun on the
computers.
z Initial Plug-in Process:
Please plug in the Master KVM Switch first before turning on any
other devices like montior or computers.
z Hot plug and Hot Swap:
EK-08RC & EK-16RC KVM switch support Hot plug and Hot swap
function.