Xerox 155 - Manual (Page 41)

Installation Planning Guide 3-1
3. Printer components and options
The printer processes the page images received from the
controller and produces the printed output. This chapter
describes the components and options available for the Xerox
DocuPrint 100/115/135/155/180 EPS printer.
Printer components
The standard printer components are the printer control console,
the sample tray, the purge tray, the two processor feeder trays,
and the feeder/stacker module or modules.
The base configuration for the printer includes an inverter feeder/
stacker and one additional feeder/stacker module.
Figure 3-1. Printer base components
1. Printer control console
2. Sample tray
3. Attention light
4. Purge tray
5. Feeder/stacker module
6. Inverter feeder/stacker module
7. Processor feeder trays