Xerox 155 - Manual (Page 31)

Controller components and options
Installation Planning Guide 2-3
5. Diskette drive
6. DVD-ROM drive
7. Quarter-inch cartridge (QIC) tape drive
8. External fixed disk drive (optional)
9. Keyboard
10. Display monitor
The Sun Blade 1000/2000 contains the following hardware
components:
• Processor (system unit) containing the following:
– One or two UltraSPARC III high-speed central processing
unit (CPU) modules
• DP 100, 115, and 135: 1 CPU
• DP 155 and 180: 2 CPUs
NOTE: In XE, all printers use a dual CPU configuration.
– 1 or 2 GB of memory (one or two 1-GB Dual In-line
Memory Modules, or DIMMs)
• DP 100, 115, and 135: 1 GB
• DP 155 and 180: 1 or 2 GB
NOTE: In XE, all printers use a 2 GB memory
configuration.
– Hard disk drive
• Sun Blade 1000: 36 GB
• Sun Blade 2000: 73 GB
– High-density, read-only DVD-ROM drive
– Diskette drive: uses 3.5 inch, 1.44 MB, double-sided,
high-density diskettes
– Ethernet
– Two Printer Controller Interface (PCI) boards to interface
with the printer
– PGx64 video graphics board
• Universal Serial Bus (USB) keyboard and three-button
mouse
• 17-inch flat panel monitor