Xerox 155 - Manual (Page 39)

Controller components and options
Installation Planning Guide 2-11
• Graphics board:
– PGx64 (Sun Blade 1000/2000)
– XVR-100 (Sun Blade 2500)
– Creator-3D series 3 graphics board
NOTE: The PGX64 graphics board is provided as a
standard feature of the processor. If more than one
connectivity option is installed, the PGx64 board is
replaced by the Creator3D graphics board.
Controller interface options
Your printing system may be configured for either the online
interface, the offline interface, or both.
Online interface
The online (channel-attached) interface receives input directly
from any environment that supports the IBM 3211 and 4245 host
systems.
Tape drive option
The 36-track cartridge tape drive is an option. Your printing
system supports the following tape drives for offline printing and
importing and exporting of resources:
• 9-track open reel tapes
• 36-track cartridge tapes