Xerox 155 - Manual (Page 38)

Controller components and options
2-10 Installation Planning Guide
6. External UltraSCSI connector
7. Twisted-pair Ethernet
8. Serial connector
9. USB connectors (The diskette drive may be plugged into
any one of these.)
10. Power connector
Keyboard The keyboard consists of alphanumeric keys similar to a
typewriter, symbols and special character keys, an extended
character set, and function keys. The keyboard is one of your
main methods of communicating with the printer. You can use
the keyboard to make selections, and to enter commands that
control functions such as requesting sample prints, or shutting
down the system.
Mouse The mouse is another main method of communicating with the
printer.
Display monitor The 17-inch LCD monitor allows you to interact with the printer
and to monitor its interaction with the various components.
During a print job, printer error messages may display to notify
you of any unexpected conditions.
Diskette drive The external diskette drive plugs into the back panel of the
processor. Diskettes inserted into a diskette drive are used to
install fonts and to load files to, and back up files from, the
internal disk drive. The diskette drive uses industry standard 3.5
inch, 1.44 MB, double-sided, high-density diskettes.
Optional
processor
components
The controller may be configured with any of the following
optional components:
• Connectivity board to enable Token Ring
• Channel interface board for channel connection to a host for
online LCDS printing
• One SCSI board to connect to an external tape drive