ZyXEL Communications Prestige 314 PLUS - Manual (Page 91)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Remote Node Setup 5-3
FIELD DESCRIPTION EXAMPLE
My Login This field is applicable for PPPoE encapsulation only. Enter the
login name assigned by your ISP when the Prestige calls this
remote node. Some ISPs append this field to the Service Name
field above (e.g., jim@poellc) to access the PPPoE server.
jim
My Password Enter the password assigned by your ISP when the Prestige
calls this remote node. Valid for PPPoE encapsulation only.
*****
Server IP This field is valid for RoadRunner service type only. The Prestige
will find the RoadRunner Server IP automatically if this field is left
blank. If it does not, then you must enter the authentication
server IP address here.
Route This field refers to the protocol that will be routed by your
Prestige – IP is the only option for the Prestige 10. IP
Edit IP This field leads to a “hidden” menu. Press [SPACE BAR] to
select Yes and press [ENTER] to go to Menu 11.3 - Remote
Node Network Layer Options. Yes
Session
Options
Edit Filter sets
This field leads to another “hidden” menu. Use the [SPACE BAR]
to select Yes and press [ENTER] to open menu 11.5 to edit the
filter sets. See the Remote Node Filter section for more details. Yes
Once you have configured the Remote Node Profile Menu, press [ENTER] to return to menu 11.
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press
[ESC] at any time to cancel.
5.1.2 PPTP Encapsulation
If you change the Encapsulation to PPTP in Menu 11.1, then you will see the next screen. Please see the
appendix for information.