ZyXEL Communications Prestige 314 PLUS - Manual (Page 89)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Remote Node Setup 5-1
Chapter 5
Remote Node Setup
This chapter shows you how to configure a remote node.
A remote node is required for placing calls to a remote gateway. A remote node represents both the remote
gateway and the network behind it across a WAN connection. Note that when you use menu 4 to set up
Internet access, you are actually configuring a remote node. We will show you how to configure Menu 11.1
Remote Node Profile, Menu 11.3 - Remote Node Network Layer Options and Menu 11.5 - Remote Node
Filter.
5.1 Remote Node Profile
From the main menu, select option 11 to display Menu 11.1 - Remote Node Profile. There are three
variations of this menu depending on whether you choose Ethernet Encapsulation, PPTP or PPPoE
Encapsulation.
See Chapter 10 for information on the “Traffic Redirect” feature.
5.1.1 Ethernet Encapsulation
Choose the Ethernet option when the WAN port is used as a regular Ethernet. The first menu 11.1 screen
you see is for Ethernet Encapsulation shown next.