ZyXEL Communications Prestige 314 PLUS - Manual (Page 191)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Remote Management 14-3
If you just wish to block certain users from using these services, then use filtering
– please see menu 21.1.
Figure 14-2 Menu 24.11 – Remote Management Control
Table 14-1 Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
TELNET Server FTP
Server
Web Server
SNMP Server
DNS Server Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
Server Port This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management. 53
Server Access Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable. LAN only
Secured Client IP The default 0.0.0.0 allows any client to use this service to remotely
manage the Prestige. Enter an IP address to restrict access to a
client with a matching IP address. 0.0.0.0
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = WAN only
Secured Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN only
Secured Client IP = 0.0.0.0
Web Server: Port = 80 Access = LAN only
Secured Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = LAN only
DNS Service: Port = 53 Access = LAN only
Press ENTER to Confirm or ESC to Cancel: