ZyXEL Communications Prestige 314 PLUS - Manual (Page 170)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
12-8 Firmware and Configuration Maintenance
Figure 12-6 Successful Backup Confirmation Screen
12.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
FTP and TFTP are the preferred methods for restoring your current computer configuration to your Prestige
since FTP and TFTP are faster. Please note that you must restart the system after the file transfer is complete.
WARNING!
DO NOT INTERUPT THE FILE TRANSFER PROCESS AS THIS MAY PERMANENTLY
DAMAGE YOUR PRESTIGE. WHEN THE RESTORE CONFIGURATION PROCESS IS
COMPLETE, THE PRESTIGE WILL AUTOMATICALLY RESTART.
12.3.1 Restore Using FTP or TFTP
For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this
chapter.
** Backup Configuration completed. OK.
### Hit any key to continue.###