ZyXEL Communications Prestige 314 PLUS - Manual (Page 145)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Traffic Redirect 10-3
To configure the parameters for traffic redirect, enter 11 from the main menu to display Menu 11.1—
Remote Node Profile as shown next.
Figure 10-3 Menu 11.1 — Remote Node Profile
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].
Table 10-1 Menu 11.1 — Remote Node Profile (Traffic Redirect Field)
FIELD DESCRIPTION EXAMPLE
Edit Traffic
Redirect Press [SPACE BAR] to select Yes or No.
Select No (default) if you do not want to configure this feature.
Select Yes and press [ENTER] to configure Menu 11.6 — Traffic
Redirect Setup. Yes
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press
[ESC] at any time to cancel.
10.1.1 Traffic Redirect Setup
Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway
using Menu 11.6 — Traffic Redirect Setup.
Menu 11.1 - Remote Node Profile
Rem Node Name= ? Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A Edit Traffic Redirect= Yes
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel.