ZyXEL Communications Prestige 314 PLUS - Manual (Page 166)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
12-4 Firmware and Configuration Maintenance
Example of FTP Commands from the DOS Prompt
Figure 12-2 FTP Session Example
FTP GUI Clients
The following table describes some of the commands that you may see in FTP GUI clients.
Table 12-2 General Commands for GUI Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your
ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).
TFTP and FTP over WAN Will Not Work When
• Telnet service is disabled in menu 24.11.
• A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block Telnet service.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit