ZyXEL Communications Prestige 314 PLUS - Manual (Page 90)

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
5-2 Remote Node Setup
Figure 5-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation
Table 5-1 Fields in Menu 11.1 (Ethernet Encapsulation)
FIELD DESCRIPTION EXAMPLE
Rem Node
Name Enter a descriptive name for the remote node. This field can be
up to eight characters. LAoffice
Active Press [SPACE BAR] to select Yes (activate remote node) or No
(deactivate remote node). Yes
Encapsulation Ethernet is the default encapsulation. Press the [SPACE BAR] if
you wish to change to PPPoE or PPTP encapsulation. Ethernet
Service Type Press [SPACE BAR] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager
(RoadRunner Manager authentication method) or, RR-Telstra
(RoadRunner Telstra authentication method). Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner;
otherwise choose Standard. Standard
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My
Password fields are not applicable in this case.
Service Name This is valid only when you have chosen PPPoE encapsulation.
If you are using PPPoE encapsulation, then type the name of
your PPPoE service here. poellc
Outgoing
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A Edit Traffic Redirect= No
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel.