Xerox 480cx - Manual (Page 95)

Configuring Automatic Dialing Features 3-19
3
Speed Dialing
You can store up to 50 numbers in two digit Speed Dial locations (01-50).
Storing a Number for Speed Dialing
You can assign up to 50 fax or telephone speed dial numbers using the two
digit numbers 01-50 on the Number keypad.
1 Press and hold the Speed/Dual button for 2 seconds.
2 Enter a two digit location number (01 through 50) to which you want to
store a number, then press the Start/Enter button.
If a number is already stored in the location, the display shows the
number in the upper line and 1:RENEW 2:OTHER in the bottom line.
Press 1 to delete the existing number or 2 to select another speed dial
number.
3 Enter the telephone number you want to store, then press the Start/
Enter button.
4 To assign a name to the number, enter the desired name. For
information on how to enter names, see Entering Alphanumeric
Characters on page 3-26.
Or
If you don’t want to assign a name, skip this step.
5 Press the Start/Enter button when the name appears correctly or
without entering a name.
6 To store more telephone numbers, repeat steps 2 through 5.
Or
To return to Standby mode, press the Stop button.
Print the 480cx User Guide