Xerox 480cx - Manual (Page 113)

Polling 3-37
3
4 Press the Start/Enter button to confirm TX POLL. The display
prompts you to enter a 4-digit poll code.
Note: The poll code is preset to 0000 at the factory. This setting
represents no poll code.
5 If you want to use a poll code, enter a 4-digit code (except 0000).
6 Press the Start/Enter button.
Or
If you do not want to secure the transmission with a Poll code, press the
Start/Enter button when the display shows 0000 for TX-POLL CODE.
If you previously entered a poll code, and do not want one, you may
enter 0000 and then press the Start/Enter button.
The machine stores the document in memory. The display shows a
count of the number of pages being stored in memory and the remaining
memory capacity.
7 The machine returns to Standby mode and displays a reminder that a
Polling Transmission is set. The machine automatically switches to
FAX mode (automatic receiving) when configured to be polled.
Print the 480cx User Guide