Xerox 480cx User Manual
Page 55
System Setup
1-43
1
Clean Head
The Clean Head procedure cleans the print nozzles and removes any
deposits that may impair printing functions.
To run the Clean Head Procedure:
1
Press the Menu button, then press the Maintenance button on the one-
touch keypad. The display indicates SELF TEST ?.
2
Press the UP button. CLEAN HEAD ? appears in the LCD display.
3
Press the Start/Enter button. PRINTING... appears on the LCD
display.
The WorkCentre 480cx prints a head cleaning test pattern. Note the series
of diagonal lines across the top and bottom of the test pattern. Breaks within
a line of the same color indicate a clogged nozzle. Try running the Clean
Head procedure again if you see breaks in the diagonal lines.
Select Language
Select Language allows you to configure the default language for the LCD
panel display. You may choose between five different languages: English,
German, French, Italian, and Spanish.
To select a default language:
1
Press the Menu button, then press the System Setup button on the one-
touch keypad. The display indicates RINGER VOLUME ?.
2
Press the Up or Down buttons until SELECT LANGUAGE ? and ITEM
1-5 appear in the LCD display.
3
Press the UP or Down buttons to scroll through the language options. A
flashing cursor will indicate the currently selected language.
4
Press the Start/Enter button to confirm your language selection.
Print the 480cx User Guide