Xerox 480cx - Manual (Page 82)

3-6 Sending a Fax
To send a fax using the Group Dialing feature:
1 Adjust the document guides to match the width of the document.
2 Slide the document face down into the Automatic Document Feeder
until it is grasped and pulled into the machine.
Note: Pressing the Express button automatically selects Standard
resolution. This will allow the WorkCentre 480cx to scan each page into
memory in three seconds, reducing total fax time.
3 Follow the procedure for the desired operation (see Memory
Transmission (Broadcasting) on page 3-10 or Delayed Transmission on
page 3-12).
4 When you come to the step where the display prompts you to enter the
remote fax number, enter the Group Number.
Note: You can use only one Group Number in a single operation.
5 Continue the procedure to complete the (Memory Transmission or
Delayed Transmission) operation. Your machine will automatically
scan the document loaded in the Automatic Document Feeder into
memory and subsequently dial each of the numbers included in the
group.
Print the 480cx User Guide