There are three submenus under the Tray Settings menu: Tray 1 (MPT), Tray 2, and Tray 3.
You can set paper size and paper type for each tray under these menus. (Display Pop-up
and MPT Mode can only be set for Tray 1 (MPT).)

Tray 3 is displayed only when the optional sheet feeder is installed.

The settings menu for Tray 1 (MPT) is displayed only when the MPT Mode is set to Panel
Specified.

Common Settings for Tray 1 (MPT), Tray 2, and Tray 3

Item

Description

Paper Type

Specifies the type of paper loaded in each tray.

•

Tray 1 (MPT) (default: Thin Card Stock)

•

Tray 2 (default: Plain)

•

Tray 3 (default: Plain)

For details, refer to

Setting Paper Types and Sizes

on page 50.

Paper Size

Specify the paper size and orientation for each tray.

•

Tray 1 (MPT) (default: Driver Size)

•

Tray 2 (default: Auto)

•

Tray 3 (default: Auto)

For details, refer to

Setting Paper Types

on page 50.