Xerox Color Printer Phaser 6280 - Manual (Page 111)

Color Registration
Phaser® 6280 Printer
112
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the
values of the straightest lines.
When “0” is the value nearest the straightest line, you do not need to adjust the color
registration. When the value is not “0”, follow the procedure outlined in “Entering Values”.
Note: You can also use the densest colors of the grid to find the straightest lines. The colors
printed at the highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration
Correction Chart to make adjustments.
1. Press the Menu button to display the Menu screen.
2. Press the Up Arrow or Down Arrow button until Admin Menu is displayed, then press
the Forward Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until Maintenance Mode is displayed, then
press the Forward Arrow or OK button.
4. Press the Up Arrow or Down Arrow button until Adjust ColorReg i is displayed, then
press the Forward Arrow or OK button.
5. Press the Up Arrow or Down Arrow button until Enter Number is displayed, then press
the Forward Arrow or OK button.
6. Press the Up Arrow or Down Arrow button until you reach the value displayed on the
chart.
7. Press the Forward Arrow button once and move the cursor to the next value.
8. Repeat steps 6 and 7 to continue adjusting the color registration.
9. Press the OK button twice.
10. Press the Up Arrow or Down Arrow button until Color Reg Chart displays, then press
the Forward Arrow or OK button. The Color Registration Correction Chart is printed
with the new values. When printing is finished, the print screen is displayed again.
11. Color registration adjustment is complete when the straightest Y (yellow), M
(magenta), and C (cyan) lines are next to the “0” line.
If “0” is not next to the straightest lines, determine the values and adjust again.
Note: After printing the Color Registration Correction Chart, do not turn off the printer until
the printer motor has stopped running.