Safety symbols marked on product – Xerox Color Printer Phaser 6280 User Manual
Page 13
User Safety
Phaser® 6280 Printer
13
•
Carry the printer without tilting it.
Caution:
Do not tilt the printer more than 10 degrees to the front/back or right/left.
Tilting more than 10 degrees may lead to consumables inside the printer spilling out.
Note:
The rear side of this printer is heavier than the front. Be aware of this weight
difference when moving the printer.
•
Do not place any food or liquids on the printer.
Caution:
Damage to the printer resulting from improper moving or failure to repackage the
printer properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States
and Canada. Coverage may vary outside these areas; please contact your local
representative for details.
See also:
Safety Symbols Marked on Product
Use caution (or draws attention to a particular
component). See the manual(s) for information.
Hot surface on or in the printer. Use caution to
avoid personal injury.
It may take 30 minutes for the fuser to cool down.
Do not touch the item.