Xerox Color Printer Phaser 6280 User Manual
Page 38

Configuring the Network Address
Phaser® 6280 Printer
38
Using the Control Panel
To manually set the IP address:
1. On the control panel, select the
Menu
button.
2. Select the
Admin
menu, and then press the
OK
button.
3. Select the
Network Setup
menu, and then press the
OK
button.
4. Select the
TCP/IP
menu, and then press the
OK
button.
5. Select
IPv4
, and then press the
OK
button.
6. Select
IP Address
use the arrows to configure the IP values, and then press the
OK
button.
Changing or Modifying the IP Address Using CentreWare IS
CentreWare IS provides a simple interface that enables you to manage, configure, and
monitor networked printers from your desktop using an embedded web server. For
complete information about CentreWare IS, click the
Help
button in CentreWare IS to go to
the CentreWare IS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS.
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3. Click
Properties
.
4. Select the
Protocols
folder on the left sidebar.
5. Select
TCP/IP
.
6. Enter or modify the settings, and then click
Save Changes
at the bottom of the page.
Your printer reboots. Now use the new IP address to reach CWIS.