beautypg.com

Messages about the printer and other items – Xerox Color Printer Phaser 6280 User Manual

Page 135

background image

Control Panel Error Messages

Phaser® 6280 Printer

136

Messages About the Printer and Other Items

Message

Condition/Reason/Action

Over Heat Please Wait /

Error 042-700 Please Wait

The printer’s internal temperature is too high.

The printer has been stopped. Wait 1 hour before restarting the
printer. Ensure the printer has adequate cooling space around it, and
that the cooling vents are not blocked.

Tray Missing 024-946 /

Tray Missing Insert Tray 2

Tray 2 is pulled out. Push Tray 2 into the correct position.

Tray Missing 024-947 /

Tray Missing Insert Tray 3

Tray 3 is pulled out. Push Tray 3 into the correct position.

Jam at Tray 1 (MPT), 2, or 3

Check Tray 1 (MPT), 2, or 3

Open Door A

Paper is jammed inside Tray 1 (MPT), 2, or 3.

Remove the jammed paper. Open and close the front cover. See

Paper

Jams

on page 116.

Door A Open

Close Door A

The front cover is open.

Close the front cover.

Disabled Function

Error 016-158

The user is not registered to print in color when using an
authentication function.

Contact your administrator.

Invalid Job

Press OK Button

Error 016-799

When the configuration of the printer on the print driver does not
conform to the printer you are using, this message appears.

Press the Cancel button to cancel the print job.

Make sure that the configuration of the printer on the print driver
conforms to the printer you are using.

Invalid User

Error 016-757

The user is not registered to print on the printer when using an
authentication function.

Contact the administrator.

Limit Exceeded

Press OK Button

The user has exceeded the limit on the number of pages that can be
printed when using an authentication function.

Contact the administrator.

Invalid User

Press OK Button

The user is not registered to print on the printer when using an
authentication function.

Contact the administrator.

Jam at Duplexer

Open Door A

Lift Transfer Unit

Paper is jammed inside the printer.

Press the button to open the front cover and remove the jammed
paper. See

Paper Jams

on page 116.

Open Door A

Remove Paper &

Check Paper Type

Paper is jammed inside the printer.

Press the button to open the front cover and remove the jammed
paper. Check the paper type. See

Paper Jams

on page 116.