beautypg.com

Synchronizing the rt-223 – Zoom RT-223 User Manual

Page 69

background image

Other Functions

ZOOM RT-223

69

If the ENDING pattern is assigned to pad [()] and
the NEXT parameter is set to “StP”, pushing and
holding the foot switch will cause the ENDING
pattern to be played, and then play will stop.

HINT

F o r s o n g s w h i c h h a v e p re - a s s i g n e d
patterns (song numbers 0 - 9), the NEXT
p a r a m e t e r i s s e t a s f o l l o w s f o r t h e
respective pads.

1.

Connect the FS01 to the [FOOT SW]

jack on the rear panel.

2.

Press the [SONG] key to switch the

RT-223 to song mode.

3.

Press the [FUNCTION] key and then

pad 8 (FOOT SW).

The indication “FOOT SW” appears briefly on
the display, followed by the currently selected
foot switch function.
In this condition, you can change the foot switch
function setting.

4.

Press the [SONG] key.

The indication “JAM” appears on the display.

NOTE

When the jam function is assigned to the
foot switch, and the RT-223 is in a mode
other than song mode, the foot switch will
control playback/stop of the pattern/song.

5.

Press the [FUNCTION] key.

The foot switch setting is completed. In this
condition, you can use the jam function.

6.

If required, set the NEXT parameter

for each pad (

p. 38).

7.

Push the foot switch.

Playback of the pattern assigned to pad [()] starts.
Each subsequent push of the foot switch then
switches patterns according to the NEXT
parameter setting. If you hold down the foot
switch during play, the pattern of pad [()] plays.
(If you have set the NEXT parameter of pad [()]
to “Stp”, pattern playback will stop after that.)

Synchronizing the RT-223

to external MIDI equipment


The RT-223 can receive MIDI clock signals for
synchronized operation with a multi-track
recorder, sequencer, rhythm machine, or similar
equipment. This allows playback of the patterns
o r s o n g s o f t h e R T - 2 2 3 w i t h t h e t e m p o
determined by the external equipment.

1.

Connect the MIDI OUT jack of the

MTR, rhythm machine, or other MIDI
component to the [MIDI IN]
connector of the RT-223, using a
MIDI cable.

Pad

NEXT parameter

0

P02

2

P02

4

F06

6

P06

8

F02

[()]

STP

JAM

RT223(E).fm 69 ページ 2005年5月26日 木曜日 午後12時3分