Zoom RT-223 - Manual (Page 31)

Entering Patterns Using Step Input
ZOOM RT-223 31
10 .
To erase a note, use the [REPEAT/
STEP] key to move to its position.
Then press the corresponding pad
while holding down the [DELETE/
ERASE] key.
As you move the position with the [REPEAT/
STEP] key, the pad that has been input for the
current position lights up. Pressing the pad while
holding the [DELETE/ERASE] key down causes
the pad to go out and the note will be erased.
11 .
Repeat steps 8 - 10 while changing
the quantize value and duration
setting, to proceed until the end of
the pattern.
When the end of the pattern is reached, the unit
automatically loops back to the first measure.
12 .
When step input of the bass track is
completed, press the STOP [ P ] key.
The REC [ O ] key goes out, and step input is
completed.
HINT
If necessary, specify a root for the pattern
that suits the entered bass phrase. The
BASS KEY setting (p. 64) is used to set the
ro o t i n f o r m a t i o n f o r t h e p a t t e r n . F o r
patterns that are not to be used in a song
or for patterns where the bass track is
empty, making the setting is not required.
Bass track
RT223(E).fm 31 ページ ２００５年５月２６日 木曜日 午後１２時３分